Dwg | Description | Part no. |
 | | |
| | |
| .15-.27" all measuring heads with box (see info) | IA 00A |
| 3,75 - 6,75 mm all measuring heads with box (see info) | IA 00 |
| dial indicator .0001" (see info) | IAP365A |
0 | wooden box IA00 | 042399 |
1 | complete measuring head (.150-.170") | 044065 |
1 | complete measuring head (.170-.190") | 044066 |
1 | complete measuring head (.190-.210") | 044067 |
1 | complete measuring head (.210-.230") | 044068 |
1 | complete measuring head (.230-.250") | 044069 |
1 | complete measuring head (.250-.270") | 044070 |
1 | complete measuring head (4,0 mm) | 044050 |
1 | complete measuring head (4,5 mm) | 044051 |
1 | complete measuring head (5,0 mm) | 044052 |
1 | complete measuring head (5,5 mm) | 044053 |
1 | complete measuring head (6,0 mm) | 044054 |
1 | complete measuring head (6,5 mm) | 044055 |
4 | vertical rack | 041829 |
5 | rack guide pin | 041815 |
6 | E-clip | 042026 |
7 | spring | 041816 |
8 | horizontal rack Ø 1,50 x 4,13 mm * | 044060 |
8 | horizontal rack Ø 1,52 x 4,13 mm | 044061 |
8 | horizontal rack Ø 1,53 x 3,32 mm | 044062 |
8 | horizontal rack Ø 1,55 x 4,32 mm | 044063 |
9 | guide pin | 041830 |
10 | pinion | 041831 |
11 | axle (ø 0,5 x 2 mm) | 042207 |
12 | sleeve (.16-.18" / 4-4,5mm) | 041832 |
12 | sleeve (.20-.26" / 5-6,5mm) | 041833 |
14 | centering sled | 041834 |
15 | centering spring | 041835 |
16 | contact .16" / .20" (4 + 5 mm) ** | 041836 |
16 | contact .18" / .22" (4,5 + 5,5 mm) | 041837 |
16 | contact .24" (6 mm) | 041838 |
16 | contact .26" (6,5 mm) | 041839 |
17 | long depth stop | 041844 |
18 | short depth stop | 041845 |
19 | knurled knob | 041846 |
20 | holder for bore gage heads (inch) | 044071 |
20 | holder for bore gage heads (metric) | 044064 |
22 | measurement chart (inch) | 041849 |
24 | adjustment screw | 042077 |
* The standard size original horizontal rack (.20-.26") is #044060. The larger diameters and lengths listed are available for repair purposes. They may not always be in stock. ** This contact is used for all .16", .20", 4 mm and 5 mm bore heads. The thickness of the contact is 0.55 mm.
|
