 | 
contact point wrench (for items #9, #13, #14, #16, #18)
large diameter = .320" and small diameter = .195" | X2-89946 |
| extension and locknut wrench | X2-89947 |
| hex wrench | X2-89942 |
1 | gaging unit assembly carbide/steel | X2-86066 |
1 | gaging unit assembly steel/steel | X2-86056 |
2 | gaging plunger | X2-86456 |
3 | centralizing plunger (order E-ring separately) | X2-86556 |
4 | centralizer spring | X2-89256 |
5 | centralizer washer | X2-89456 |
6 | E-ring | X2-85559 |
7 | head | X2-86156 |
8 | gaging plunger stop screw | X2-87456 |
9 | locknut | X2-85932 |
10 | equalizer | X2-86356 |
11 | equalizer screw | X2-89356 |
12 | adjusting screw | X2-88456 |
13* | centralizing plunger extension .837” long (see notes below) | X2-86259 |
13* | centralizing plunger extension .978” long (see notes below) | X2-86260 |
14* | gaging plunger extension .625” long (see notes below) | X2-86457 |
14* | gaging plunger extension .750” long (see notes below) | X2-86458 |
15 | **range extension set (6 extensions, contacts and locknuts) | X2-85867 |
15 | ***range extension kit 12.125 through 24.56 inches | B0-85966 |
16 | range extension 1.812” long | X2-85861 |
16 | range extension 2.812” long | X2-85862 |
16 | range extension 3.812” long | X2-85863 |
16 | range extension 4.094” long | X2-85864 |
16 | range extension 5.094” long | X2-85865 |
16 | range extension 6.094” long | X2-85866 |
17 | locknut for range extension | X2-85961 |
18 | contact point, carbide | X2-86696 |
18 | contact point, DelrinŽ | X2-86696D |
18 | contact point, steel | X2-86656 |
18 | contact point, diamond | X2-86676 |
27 | compression spring | X2-89366 |
28 | collar for compression spring | X2-89466 |
32 | screw for extension housing | X2-82656 |
Notes: the range extensions (item #16) have a thread diameter of 7/16-40. We provide this information in case the threads on the measuring head are damaged and need to be re-tapped. * Special centralizing extensions (#13) and plunger extensions (#14) are needed when measuring above 9" in diameter. To determine which size extensions you will need, please refer to the details on page 13. ** Range extension set X2-85867 does not include extension #13 or extension #14 as shown in the drawing. If you need these, they must be ordered separately. *** The range extension kit B0-85966 will allow you to measure beyond the standard range of this bore gage, up to 24.56 inches. The kit consists of the following 6 items: - (3 pieces) 4" long range extensions which can be combined
- (1 piece) .625" gaging plunger extension
- (2 pieces) .975" centralizing plunger extension
In theory, multiple extensions can be combined but at some point the accuracy will suffer. If accuracy is critical, then a different bore measuring gage must be considered. We have no data to substantiate this.
|
