These are the very best small dial (40 mm diameter) indicators available. The craftsmanship and accuracy of these Swiss-made gages is superior to all others. The spindles are made of cold rolled steel and, unlike any other indicator, the spindle will not wear down with use and the teeth will not bend. They have an exceptionally long useful life which makes an investment in these worthwhile. We are still repairing Compac dial indicators made in the 1960's. These indicators come with flat backs. Lug backs, if needed, must be bought separately. You can find them on page 61. The stem diameter is 8 mm and a sleeve adaptor will have to be used if you intend on mounting them to 3/8" holders. Adapters and other contact points can be found on page 133. Bezel locks are not included on the standard models but are available for most models. They can not be retrofitted and must be specified at the time of ordering. If you need them, be sure to ask for them. Spare parts and repair service for Compac indicators are available from Long Island Indicator Service. Many of these models and all of the parts are in our stock. If an item needs to be ordered from Europe, you will have to expect a 3-4 week delivery. 
Compac type 353
- 0.01 mm graduations
- 5 mm travel
- maximum total error 14 µm
- continuous dial as pictured
- order number 27789
- your price $170.00 ... order now
Compac type 355
- 0.002 mm graduations
- 3 mm travel
- maximum total error 12 µm
- continuous dial as pictured
- order number 27801
- your price $301.00 ... order now
Compac type 367 (not shown) - 0.001 mm graduations
- 1 mm travel
- maximum total error 5 µm
- continuous dial 0-10
- order number 27810
- your price $336.00 ... order now
Schematic drawing for 353, 355 and 367 models shown on this page. Dimensions are metric. Note: This drawing shows the presence of a bezel clamp screw. Indicators on this page do not have this screw.
| 
